Product ID:WALLHIDE LATEX FLAT,80-45
MSDS Date:04/15/1987
FSC:8010
NIIN:00-463-7063
MSDS Number: BHVNR

PPG INDUSTRIES INC

260 KAPPA DRIVE
PITTSBURGH, PA 15238

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

SILICA, CRYSTALLINE - FUSED

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

SILICA, AMORPHOUS, DIATOMACEOUS EARTH, CONTAINING LESS THAN

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 5%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST; 9293

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20 - 25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

2,2,4-TRIMETHYL-1,3-PENTANEDIOL ISOBUTYRATE

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 1%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS,ROSINS,AND ADDITIVES (PROPRIETARY)

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K

DEIONIZED WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 25%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AVOID LONG-TERM AND REPEATED
CONTACT.CONTAINS A FORM OF CRYSTALLINE SILICA.LONG-TERM EXPOSURES
TO HIGH LEVELS OF THIS MATERIAL MAY LEAD TO A DISABLING LUNG INJURY
KNOWN AS SILICOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATING.CAUSES REDNESS,ITCHING,BURNING
SENSATION & VISUAL DISTURBANCES.SKIN:MOD IRRITATING.CAUSES
DRYNESS,ITCHING,CRACKING,BURNING,REDNESS,& SWELLING.INGESTION:MAY
BE HARMFUL IF SWALLOWED.INHA LATION:VAPOR AND SPRAY MIST MAY BE
HARMFUL IF INHALED.

First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOR AT LEAST 15
MIN.SKIN:FLUSH IMMEDIATELY WITH PLENTY OF WATER FOLLOWED BY WASHING
WITH SOAP AND WATER.INGESTION:DO NOT INDUCE VOMITING.GET MED
ATTN.INHALA TION:IF AFFECTED BY INHALATION OF VAPOROR SPRAY
MIST,REMOVE TO FRESH AIR.APPLY ARTIFICIAL RESPIRATION AND OTHER
SUPPORTIVE MEASURES AS REQUIRED.

Extinguishing Media:USE NFPA CLASS B EXTINGUISHERS (CO*2,DRY CHEM OR
UNIVERSAL AQUEOUS FILM FORMING FOAM) FOR CLASS IIIB COMBUST LIQ
FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROT EQUIP
.WATER SPRAY MAY BE INEFFECTIVE,BUT MAY BE USED TO COOL CLOSED CONT
TO PREV PRESS BUILD UP & POSS (SEE SUP)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO EXTREME HEAT
MAY EXPLODE OR BURST FROM BUILD-UP OF STEAM PRESSURE.HAZ DECOMP
PROD:CARBON MONOXIDE.

Spill Release Procedures:PROVIDE MAX VENT.ONLY PERSONNEL W/ PROPER
RESP,SKIN & EYE PROTECTION SHOULD BE PERMITTED IN AREA.REMOVE ALL
SOURCES OF IGNITION.TAKE UP SPILLED MATL WITH
SAWDUST,VERMICULITE,OR OTHER ABSORBENT MATL AN D PLACE INTO
CONTAINERS FOR DISPOSAL.
Neutralizing Agent:N/K

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
QUANT IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS
IIIB COMBUST LIQUIDS.PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
COATING SYSTEM,READ THE MSDS FOR THE OTHER COMPONENT(S) BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL & GENERAL VENT NECESSARY TO KEEP AIR CONC BELOW TLV
.USE ALSO TO REMOVE DECOMP PRODUCTS (SEE SUP DATA)
Protective Gloves:NITRILE,NEOPRENE OR LATEX RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING MADE OF
NITRILE,NEOPRENE OR LATEX RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED SHOES AND
CLOTHING.
Supplemental Safety and Health
FIRE FIGHT PROC:AUTOIGNITION OR EXPLO WHEN EXPOSED TO EXTREME HEAT.IF
WATER IS USED,FOG NOZZLES ARE PREFERABLE.VENT:DURING WELDING OR
FLAME CUTTING ON SURFACES COATED WITH THIS PRODUCT.

Boiling Pt:B.P. Text:100-257C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:17.3 MMHG
Vapor Density:>1 (AIR=1)
Spec Gravity:1.31 (WATER=1)
Evaporation Rate & Reference:33 (BUTYL ACETATE=100)
Solubility in Water:43.4%
Appearance and Odor:LIQUID
Percent Volatiles by Volume:53.20

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES,STRONG MINERAL ACIDS,OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:PRODUCED WHEN
HEATED.WELDING,BRAZING,OR FLAME CUTTING ON SURFACES COATED W/ THIS
MATL MAY PRODUCE FUMES INCLUDING CO.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .EMPTY CONTAINERS SHOULD BE
RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE MANAGEMENT
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.